60T Low Bed Trailer Transport To Kenya

First time buyer of Panda Mech low bed truck trailer from Kenya customer. Since it was the first time to buy Panda Mech for semi-trailer products, the customer initially had doubts about our products. However, trust is built by both parties. Our sales provided the customer with many product photos and our production plant, so that the customer gradually trusted us.

During the communication with the customer, the sales staff provided professional advice and suggestions to the customer and finally decided to buy 60 tons lowbed truck semi-trailer with folding ladder.

60 ton lowbed trailer 7

It is a hydraulic folding ladder, which is easy to move equipment up and down. It includes a fixed tail plate fixed at the end of the lowbed truck trailer. The outside front and rear ends of the fixed tailgate are pivotally attached to the main ladder. Two main ladders are attached to the fixed tailboard.

There are two main rotating brackets between them, two main climbing ladders with rear folding ladders at the ends away from the main rotating brackets, and connectors between the main climbing ladders and the rear folding ladders.

The fixed tail plate is fixed with hydraulic brackets at the front and rear ends of the outer side, the centers of the two hydraulic brackets are connected with hydraulic cylinders by rotation, and the centers of the inner surfaces of the two main ladders are fixed with hydraulic cylinder brackets corresponding to the folding rotation.

The design of hydraulic folding mechanism and auxiliary support mechanism not only can automatically fold and expand, but also can play a stable auxiliary support role when heavy vehicles pass, which greatly improves the overall work efficiency.

60 ton lowbed trailer 8

In order to solve the safety and wind resistance problems during driving, the first hydraulic cylinder drives the first ladder lift, and the second hydraulic cylinder unfolds and folds during the lift.

And there is an auxiliary support mechanism under the second ladder, so that the ladder can be used under poor ground conditions to ensure the safety and stability of the ladder.

The ramp is used to move the cargo on the low flatbed truck trailer. The length of the ramp depends on the weight of the cargo. Longer ramps are required to move heavy loads on trailers.

Using a longer ramp reduces the slope and makes it easier to move heavy loads. When choosing a ramp, you need to consider the maximum weight of the cargo.

60 ton lowbed trailer 9

Other different types of low bed truck climbing ramps

Mechanical ramps: A manual mechanism or spring is used to raise the ramp to the correct height. Mechanical ramps are cheap and easy to maintain. However, ramps are very cumbersome to operate, especially when moving heavy loads.

Hydraulic ramps: These ramps use hydraulic cylinders rather than springs to raise the ramp. Hydraulic ramps are efficient and easy to use. You can use hydraulic ramps to move heavy loads quickly. However, ramps are more expensive than mechanical ramps.

60 ton lowbed trailer 10

Advantages of low-bed semi-trailers

Low-bed semi-trailer It is widely used in different fields compared to other heavy transport vehicles. The main advantages are outlined below.

Stability: Compared to other heavy trucks, low bed trucks have a very good deck. Therefore, it is more stable when transporting heavy loads.

Safety:The low bed truck is designed to carry heavy loads. Low bed trucks are made of high strength materials and can withstand pressures of up to 700mpa.

Compliance with height restrictions:Some countries/regions have legal restrictions on the height of goods that can be transported on the road. Lowbed truck trailers provide a solution for companies to safely transport over-height equipment in situations where it is illegal to do so.