Panda Mech September promotion
Home > Low bed Trailer > Gooseneck Low Bed Trailer

2Axle Gooseneck Lowboy Trailer

PANDA Mechanical is manufacture of high quality, strong and competitive prices 2 axle gooseneck lowboy trailer which can carry dozer, excavators, and other heavy loads on it. ,We can change technical specifications and graphic design according to the dema

2Axle Gooseneck Lowboy Trailer specifaction

Loading Capacity 20 to 120 tons
Axles BPW, FUWA or Certificated China brand
Steering Self Steering or hydraulic steering axles
Accessories JOST or China brand parking leg and king pin
Chassis ST Quality Steel useage
Suspension Air or Mechanical Suspension
Brakes ABS and EBS brake system
Rims Steel Rims
Tires Pirelli, Bridgestone, Goodyear brand tires
Loading Ramp Hydraulic or Pnemautic Ramp

Loading Ramp    

–  It is a pnemautic or hydraulic system. Ramp movement shall be provided by installation of a covered buton on to the tail part. Width of the ramp shall be 800 or 1000 mm according to lowbed


–  Low Loader rack is welded by submerged welding machine from 20 mm x 150 mm (ST 52.3 A Quality) bottom and top flat steel and 10 mm ST 52.3 hub plate. It has “I” section and also has 4 pieces


–  Top middle part of the platform shall be covered by 3/4 mm thick metal sheet pursuant to utiliziation. Rubber or Hardwoods shall be installed onto the sides of the platform ( points where the pallet or wheels are) to provide maximum friction.

Brake System

–  Dual circuit brake hardware, 24” Service brake bellows fitted to axle 3 24×30” Emergency

brake fitted to axle 1 and axle 2 Load balancing distribution valve, Automatic or manual brake adjusters

– WAbco ABS, EBS brakes


– Is manufactured in accordance with the European standards.It has a carrying capacity of 12 to 16 tons and donated Brake lining and bearing brand TIMKEN or FAG. Axle is certificated by ISO 9001 and 100.000 km warranty.

– 2 axles with the capacity 12-14-16 tons, are used

– Brand BPW, FUWA,China made

– There are brake shoes and heavy brake levers suitable for TSE norms

Suspension System

–  Parabolic double deck Z springs, Stowage springs, bogie suspension

Electrical System

–  2×7 pin sockets – 12/24V, lights accord to standard in SAE rear stop lamps, side marker lamps, brake safety warning lamps and signal light fitted at the rear

– 2 tail & stop combined lamps (red)

– 2 turn signal combined lamps (orange)

– Steel supports for the lamps

Front Axle Lifing

–  Remote operated elevating system for front axle shaft in cabin

Tires And Rims

–  235/70 R 17.5

–  245/70 R 17.5

–  295/60 R 22.5

–  11 R 22.5

–  12 R 22.5

–  315/80 R 22.5

King Pin

–  JOST or China brand Steel king-pin which is 3,5” suitable for 6×4 tractor unit according to DIN 74080 standards and 3½” 42 CRMO4 according to DIN 74083 standards are used.

– King pin height will be arrange according to your tractor unit

Parking Legs

–  JOST or Turkish brand two speed, telescopic, mechanical conveyor legs, with the capacity of 24 tons each

Paint / Color

–  Before the painting, surface and accessories of chassis are made cleaned

–  PPG or DYO brand high build epoxy filter is used for first painting.

–  PPG or DYO brand is used for the main painting (3 times ).

–  The RAL code color selection is made according to customers choice.


– Load lushing ring

– 1 x tool box

– 2 x Bike safety bar

– Plastic or Steel Mudguards

– Parking chock with handle Ladder

– Fire extinguisher closet and fire extinguisher tube


Optional Specifications

–  Lowbed platform can be pooled type to load high loads

–  Extra spare tire conveyor

–  Extra oil tank